Seventh-day Adventist Church
FLORIDA CONFERENCE OF SEVENTH-DAY ADVENTISTS

Home

Camp Meeting : Satellite Broadcast : GEOSATpro DVR1000ci PVR

 

Hope Church Channel

Instructions For Programming
GEOSATpro DVR1000ci PVR
To View Hope Church Channel

Note: Before attempting to program new channels it may be necessary to make adjustments to the dish and/or LNB to obtain a strong signal that reflects good signal and quality levels. Poor signal quality will affect the ability to program and properly receive additional channels. A signal of 30% on the DVR1000ci will usually provide adequate signal to allow a search.

Adding New Transponder / Channel Information

  1. Using the remote control, press the Menu key
  2. Go to INSTALLATION, press the Enter key
  3. Enter Passcode 0000
  4. Go to TP Edit / Scan, press the Enter key
  5. Highlight SATELLITE NAME, press the VOL (Right or Left) Arrow key to select the satellite. (i.e.AMC4 Ku for Hope Church Channel )
  6. Go to TP FREQUENCY, enter the frequency 12116.900 for Hope Church Channel
    (This frequency may be slightly different for some receivers. See note on main instruction page)
  7. Go to POLARIZATION press the VOL (Right or Left) Arrow key to select polarity Horizontal
  8. Go to SYMBOL RATE, enter the symbol rate 3100 for Hope Church Channel
  9. Go to SCAN , press the VOL (Right or Left) Arrow key to FREE only, press OK
  10. Upon completion of the scan press EXIT several times until the receiver displays "Saving Changes Please Wait"

In a moment, the receiver will reset and display the new channel
© Florida Conference of Seventh-day Adventists : 655 North Wymore Road, Winter Park, Florida 32789-1715 : (407) 644-5000 : Fax: (407) 644-7550 : Design and Maintenance by A. Lee Bennett Jr.